74HC4052-Q100;
74HCT4052-Q100
Dual 4-channel analog multiplexer/demultiplexer
Rev. 3 — 27 February 2020
Product data...
74HC4052-Q100;
74HCT4052-Q100
Dual 4-channel analog multiplexer/demultiplexer
Rev. 3 — 27 February 2020
Product data sheet
1. General description
The 74HC4052-Q100; 74HCT4052-Q100 is a dual single-pole quad-throw analog switch (2x SP4T) suitable for use in analog or digital 4:1 multiplexer/demultiplexer applications. Each switch features four independent inputs/outputs (nY0, nY1, nY2 and nY3) and a common input/output (nZ). A digital enable input (E) and two digital select inputs (S0 and S1) are common to both switches. When E is HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to
voltages in excess of VCC.
This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
Automotive product qualification in accordance with AEC-Q100 (Grade 1) Specified from -40 °C to +85 °C and from -40 °C to +125 °C
Wide analog input
voltage range from -5 V to +5 V Low ON resistance:
80 Ω (typical) at VCC - VEE = 4.5 V 70 Ω (typical) at VCC - VEE = 6.0 V 60 Ω (typical) at VCC - VEE = 9.0 V Logic level translation: to enable 5 V logic to communicate with ±5 V analog signals Typical ‘break before make’ built-in ESD protection: MIL-STD-883, method 3015 exceeds 2000 V HBM JESD22-A114F exceeds 2 000 V MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω) CDM AEC-Q100-011 r...
