74LVC1G384-Q100
Bilateral switch
Rev. 3 — 8 February 2022
Product data sheet
1. General description
The 74LVC1G384-Q10...
74LVC1G384-Q100
Bilateral switch
Rev. 3 — 8 February 2022
Product data sheet
1. General description
The 74LVC1G384-Q100 is a single pole, single throw analog switch. It has two input/output terminals (Y and Z) and an enable pin (E). When E is HIGH, the analog switch is turned off. Control inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments.
Schmitt-trigger action at control inputs makes the circuit tolerant of slower input rise and fall times.
This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
Automotive product qualification in accordance with AEC-Q100 (Grade 1) Specified from -40 °C to +85 °C and -40 °C to +125 °C
Wide supply
voltage range from 1.65 V to 5.5 V Very low ON resistance:
7.5 Ω (typical) at VCC = 2.7 V 6.5 Ω (typical) at VCC = 3.3 V 6 Ω (typical) at VCC = 5 V ESD protection: MIL-STD-883, method 3015 exceeds 2000 V HBM EIA/JESD22-A114-A exceeds 2000 V MM EIA/JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω) 32 mA continuous switch current High noise immunity
CMOS low power dissipation TTL interface compatibility at 3.3 V Latch-up performance meets requirements of JESD 78 Class I Over
voltage tolerant inputs to 5.5 V
3. Ordering information
Table 1. Ordering information
Type number
Package
Temperature r...