74LVC1G74-Q100
Single D-type flip-flop with set and reset; positive edge trigger
Rev. 5 — 20 September 2021
Product dat...
74LVC1G74-Q100
Single D-type flip-flop with set and reset; positive edge trigger
Rev. 5 — 20 September 2021
Product data sheet
1. General description
The 74LVC1G74-Q100 is a single positive edge triggered D-type flip-flop with individual data (D), clock (CP), set (SD) and reset (RD) inputs, and complementary Q and Q outputs. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and appear at the Q output. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments.
Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times.
This device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down.
This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
Automotive product qualification in accordance with AEC-Q100 (Grade 1) Specified from -40 °C to +85 °C and from -40 °C to +125 °C
Wide supply
voltage range from 1.65 V to 5.5 V Over
voltage tolerant inputs to 5.5 V High noise immunity ±24 mA output drive (VCC = 3.0 V)
CMOS low power consumption Direct interface with TTL levels IOFF circuitry...