10-Quad RapidIO® Switch
Datasheet 80KSW0005
1 Device Overview
The CPS-10Q (80KSW0005) is a serial RapidIO switch whose functionality is central to routing packets for distribution among DSPs, processors, FPGAs, other switches, or any other sRIO-based devices. The CPS-10Q supports serial RapidIO packet switching (unicast, multicast, and an optional broadcast) from any of its 16 input ports to any of its 16 output ports.
2 Features
u Interfaces - sRIO – 40 bidirectional serial RapidIO (sRIO) lan.
10-Quad Switch
10-Quad RapidIO® Switch
Datasheet 80KSW0005
1 Device Overview
The CPS-10Q (80KSW0005) is a serial RapidIO switch whose functionality is central to routing packets for distribution among DSPs, processors, FPGAs, other switches, or any other sRIO-based devices. The CPS-10Q supports serial RapidIO packet switching (unicast, multicast, and an optional broadcast) from any of its 16 input ports to any of its 16 output ports.
2 Features
u Interfaces - sRIO – 40 bidirectional serial RapidIO (sRIO) lanes v 1.3 – Port Speeds selectable: 3.125Gbps, 2.5Gbps, or 1.25Gbps – All lanes support short haul or long haul reach for each PHY speed – Configurable port count to up to 16 ports – Two enhanced quads can be configured as 4 1x ports or 1 4x ports – Supports standard 4 levels of priority – Error handling support: It allows error detection, logging and response from all major functional blocks on the device.
u Interfaces - I2C – Provides I2C port for maintenance and error reporting – Master or Slave Operation – Master allows power-on configuration from external ROM – Master mode configuration with external image compressing and checksum
u Performance
– 100 Gbps of peak switching bandwidth – Non-blocking data flow architecture within each sRIO priority – low latency for all packet length and load condition – Internal queuing buffer and retransmit buffer – Standard receiver based physical layer flow control
u Features
– –
Configurable for cut-thru and store-and-forward Device configur.