Model A100N50X4
Chip Termination 100 Watts, 50Ω
Description
The A100N50X4 is high performance Aluminum Nitride (AlN) chip termination intended as an alternative to Beryllium Oxide (BeO). The termination is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating circulators and for use in power combiners. The termination is also RoHS compliant!
General Specifications Features:
• RoHS Compliant • 100 Watt.
Chip Termination
Model A100N50X4
Chip Termination 100 Watts, 50Ω
Description
The A100N50X4 is high performance Aluminum Nitride (AlN) chip termination intended as an alternative to Beryllium Oxide (BeO). The termination is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating circulators and for use in power combiners. The termination is also RoHS compliant!
General Specifications Features:
• RoHS Compliant • 100 Watts • DC - 2.7 GHz • AlN Ceramic • Non-Nichrome Resistive Element • Low VSWR
• 100% Tested • Small Size Resistive Element Substrate Terminal Finish Operating Temperature Thick film AlN Ceramic Matte Tin over Nickel Barrier -55 to +150°C (See de rating chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value: Power: Frequency Range: V.S.W.R.
www.DataSheet.net/
50 Ohms, ± 2% 100 Watts DC – 2.7 GHz 1.1:1 to 2.7 GHz
Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change.
Outline Drawing
SIDE VIEW TOP VIEW
.040
.250
.225 .045 .130 .058 ALL DIMENSIONS IN INCHES
A100N50X4 (097) Rev B
Available on Tape and Reel For Pick and Place Manufacturing.
USA/Canada: Toll Free: Europe:
(315) 432-8909 (800) 544-2414 +44 2392-232392
Datasheet pdf - http://www.DataSheet4U.co.kr.