Bandpass SAW Filter
115MHz Bandpass SAW Filter 22.00MHz Bandwidth Part Number : A11560
Specifications
Parameter Center Frequency Insertion ...
Description
115MHz Bandpass SAW Filter 22.00MHz Bandwidth Part Number : A11560
Specifications
Parameter Center Frequency Insertion Loss 1.5 dB Bandwidth 3 dB Bandwidth 30 dB Bandwidth 40 dB Bandwidth 50 dB Bandwidth Passband Variation Absolute Delay Ultimate Rejection Material Temperature coefficient Ambient Temperature Package Size
Unit MHz dB MHz MHz MHz MHz MHz dB usec dB KHz/°C °C
Minimum
Typical
114.9
115
- 29
- 21.90
22.00
22.05
- 22.76
- 22.90
- 23.00
- 1.2
- 3.6
50 58
-9.43
25
DIP3512 (35.2x12.7x5.2mm3)
Maximum 115.1 30 22.80 23.20 1.5 4 -
Notes:
1. All specifications are based on the test circuit shown 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over
temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. This is the optimum impedance in order to achieve the performance show
Matching Configuration
INPUT 50Ω
L1 OUTPUT 50Ω
L1=68nH Source/Load Impedance=50 ohm
Notes - Component values may change depending on board layout.
Package Dimension
35. 00± 0. 5
12. 80± 0. 5
7. 00 5. 70
0. 35± 0. 05 2. 54± 0. 2
7. 62± 0. 2
45 6
3 21
Package:DIP3512
25. 40± 0. 2
2. 54± 0. 2
Unit:mm
Package: DIP3512
Input Output Ground
Unit: mm
1 5 2,3,4,6
Typical Performance
Frequency Respond
-28.8912 -38.8912 -48.8912 -58.8912 -68.8912 -78.8912 -88.8912 -98.8912 -108.8912
65 75 85 95 105 115 125...
Similar Datasheet