A1180 – A1184
Preliminary Data Sheet
PRELIMINARY DATA SHEET SUBJECT TO CHANGE WITHOUT NOTICE
Two-Wire, Programmable, Ch...
A1180 – A1184
Preliminary Data Sheet
PRELIMINARY DATA SHEET SUBJECT TO CHANGE WITHOUT NOTICE
Two-Wire, Programmable, Chopper-Stabilized, Unipolar Hall-Effect Switch
The A118X is a two-wire, unipolar, Hall-effect switch family designed for use in high-temperature applications. This device uses a patented high frequency chopper-stabilization technique on Allegro's new DABIC5 Bi
CMOS wafer fabrication process to achieve magnetic stability and to eliminate offset inherent in single-element devices and from harshapplication environments. The A118X FAMILY of devices incorporates a programmability function to allow for external trimming of the operate point. The programming is performed after final packaging of the sensor and placement of the Single In-Line Package (SIP) into the application. This advanced feature allows for optimization of sensor switching performance by effectively accounting for variations caused by magnet and SIP placement tolerances. These devices provide on-chip transient protection. A zener clamp on the power supply protects against over-
voltage conditions on the supply line. The output of the A118X FAMILY, with the exception of the A1180/2, will switch HIGH in the presence of a sufficiently large south-pole magnetic field and will switch LOW with the removal of the field. The A1180/2 has the opposite polarity as the others, switching LOW in the presence of a sufficient magnetic field and HIGH with the removal of the field. Two package styles provide a magnet...