DatasheetsPDF.com

A1184 Datasheet

Part Number A1184
Manufacturers Allegro
Logo Allegro
Description Unipolar Hall-Effect Switches
Datasheet A1184 DatasheetA1184 Datasheet (PDF)

A1184 Standard Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches Features and Benefits ▪ Chopper stabilization ▫ Low switchpoint drift over operating temperature range ▫ Low sensitivity to stress ▪ Field programmable for optimized switchpoints ▪ On-chip protection ▫ Supply transient protection ▫ Reverse-battery protection ▫ On-board voltage regulator ▫ 3.5 to 24 V operation Packages: 3 pin SOT23W (suffix LH), and 3 pin SIP (suffix UA) Description TheA1184 device is a.

  A1184   A1184






Part Number A1186
Manufacturers Allegro MicroSystems
Logo Allegro MicroSystems
Description Unipolar Hall-Effect Switches
Datasheet A1184 DatasheetA1186 Datasheet (PDF)

A1185 and A1186 Ultrasensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches The A1185 and A1186 are ultrasensitive, two-wire, unipolar Hall effect switches. The operate point, BOP, can be field-programmed, after final packaging of the sensor and placement into the application. This advanced feature allows the optimization of the sensor switching performance, by effectively accounting for variations caused by mounting tolerances for the device and the target magnet.

  A1184   A1184







Part Number A1185
Manufacturers Allegro MicroSystems
Logo Allegro MicroSystems
Description Unipolar Hall-Effect Switches
Datasheet A1184 DatasheetA1185 Datasheet (PDF)

A1185 and A1186 Ultrasensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches The A1185 and A1186 are ultrasensitive, two-wire, unipolar Hall effect switches. The operate point, BOP, can be field-programmed, after final packaging of the sensor and placement into the application. This advanced feature allows the optimization of the sensor switching performance, by effectively accounting for variations caused by mounting tolerances for the device and the target magnet.

  A1184   A1184







Part Number A1183
Manufacturers Allegro MicroSystems
Logo Allegro MicroSystems
Description Unipolar Hall-Effect Switch
Datasheet A1184 DatasheetA1183 Datasheet (PDF)

A1180 – A1184 Preliminary Data Sheet PRELIMINARY DATA SHEET SUBJECT TO CHANGE WITHOUT NOTICE Two-Wire, Programmable, Chopper-Stabilized, Unipolar Hall-Effect Switch The A118X is a two-wire, unipolar, Hall-effect switch family designed for use in high-temperature applications. This device uses a patented high frequency chopper-stabilization technique on Allegro's new DABIC5 BiCMOS wafer fabrication process to achieve magnetic stability and to eliminate offset inherent in single-element devices a.

  A1184   A1184







Part Number A11820
Manufacturers Fenghua Advanced Technology
Logo Fenghua Advanced Technology
Description RES NTWK / THICK FILM
Datasheet A1184 DatasheetA11820 Datasheet (PDF)

º Ä ñ Í ¤ ø  µ ç × ç Æ è ÷ T HI CK F I L M NE T WORK RE S I S T OR ºñĤÍøÂçµç×èÆ÷ THICK FILM NETWORK RESISTOR ÌØÐÔ FEATURES СÐÍ»¯¡¢¸ßÃܶÈ×é×° µçÐÔÄÜÎȶ¨£¬¿É¿¿ÐÔ¸ß ¿ÉµÃµ½²»Í¬µç×èÖµ×éºÏ M i n i S t a b C o m b v a l u a t u r e , h i g h d e n s i t y a s s e m b l y . l e e l e c t r i c a l c a p a b i l i t y , h i g h r e l i a b i l i t y . i n a t i o n s o f d i f f e r e n t o h m i c e a r e a .

  A1184   A1184







Unipolar Hall-Effect Switches

A1184 Standard Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches Features and Benefits ▪ Chopper stabilization ▫ Low switchpoint drift over operating temperature range ▫ Low sensitivity to stress ▪ Field programmable for optimized switchpoints ▪ On-chip protection ▫ Supply transient protection ▫ Reverse-battery protection ▫ On-board voltage regulator ▫ 3.5 to 24 V operation Packages: 3 pin SOT23W (suffix LH), and 3 pin SIP (suffix UA) Description TheA1184 device is a standard, two-wire, unipolar, Hall effect switch. The operate point, BOP, can be field-programmed, after final packaging of the device and placement into the application. This advanced feature allows the optimization of the device switching performance, by effectively accounting for variations caused by mounting tolerances for the device and the target magnet. This device is produced on theAllegro MicroSystems advanced BiCMOS wafer fabrication process, which implements a high-.


2019-02-11 : SHV-14    SHV-30    SHV-10    SHV-14    A1143    A1141    A1184    ACS724    ATS692LSH    A4989   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)