LED. AA5060PBS-Z Datasheet

AA5060PBS-Z Datasheet PDF

Part AA5060PBS-Z
Description SMD LED
Feature PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICE.
Manufacture Kingbright
Datasheet
Download AA5060PBS-Z Datasheet

PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING AA5060PBS-Z Datasheet





AA5060PBS-Z
PRELIMINARY SPEC
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
z SINGLE COLOR.
z SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER
PROCESS.
z AVAILABLE ON TAPE AND REEL.
z IDEAL FOR BACKLIGHTING.
z PACKAGE : 500PCS / REEL.
zMOISTURE SENSITIVITY LEVEL : LEVEL 4.
zRoHS COMPLIANT.
Package Dimensions
5.0X6.0mm SURFACE MOUNT LED LAMP
Part Number: AA5060PBS/Z
BLUE
Description
The Blue source color devices are made with InGaN Light
Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAH4670
APPROVED: WYNEC
REV NO: V.1
CHECKED: Allen Liu
DATE: MAY/28/2007
DRAWN: D.M.LIU
PAGE: 1 OF 6
ERP:1201003010



AA5060PBS-Z
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might leads to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Outside impact may scratch the silicone lens or
damage the internal circuitry.
4. During surface-mounting, the pickup capillary diameter should be larger than the silicone lens to insure the capillary
does not scratch or damage the lens.
SPEC NO: DSAH4670
APPROVED: WYNEC
REV NO: V.1
CHECKED: Allen Liu
DATE: MAY/28/2007
DRAWN: D.M.LIU
PAGE: 2 OF 6
ERP:1201003010




@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)