SMD LED
PRELIMINARY SPEC
ATTENTION
OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES
Features
zSingle c...
Description
PRELIMINARY SPEC
ATTENTION
OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES
Features
zSingle color. zSuitable for all SMT assembly and solder process. zAvailable on tape and reel. zIdeal for backlighting. zPackage : 500pcs / reel. zMoisture sensitivity level : level 4. zRoHS compliant.
5.0X6.0mm SURFACE MOUNT LED LAMP
Part Number: AA5060VGC/A
Green
Description
The Green source color devices are made with InGaN on G-SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded.
Package Dimensions
Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAG5695 APPROVED: WYNEC
REV NO: V.4 CHECKED: Allen Liu
DATE: JAN/13/2009 DRAWN: Y.F.Lu
PAGE: 1 OF 5 ERP: 1201004619
Selection Guide
Part No.
Dice
Lens Type
AA5060VGC/A
Green (InGaN)
WATER CLEAR
Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%.
Iv (mcd) [2] @ 30mA
Min. Typ.
180 350
Viewing Angle [1]
2θ1/2
100°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
...
Similar Datasheet