LED. AA5630UMW46-W2 Datasheet

AA5630UMW46-W2 Datasheet PDF

Part AA5630UMW46-W2
Description SMD LED
Feature ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features zSize .
Manufacture Kingbright
Datasheet
Download AA5630UMW46-W2 Datasheet

ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DIS AA5630UMW46-W2 Datasheet





AA5630UMW46-W2
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
zSize (mm): 5.6 x 3.0 x 0.77
zSuitable for all SMT assembly and solder process.
zAvailable on tape and reel.
zWhite SMD package, silicone resin.
zMoisture sensitivity level : level 2a.
zRoHS compliant.
Package Dimensions
5.6mm x 3.0mm SURFACE MOUNT LED
Part Number: AA5630UMW46-W2 Warm White
Descriptions
zThe source color devices are made with InGaN on
Sapphire-substrate Light Emitting Diode.
zElectrostatic discharge and power surge could damage
the LEDs.
zIt is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
zAll devices, equipments and machineries must be
electrically grounded.
Applications
zLCD TV / Monitor Backlight.
zArchitectural lighting.
zDecorative lighting.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAN0336
APPROVED: WYNEC
REV NO: V.5B
CHECKED: Allen Liu
DATE: SEP/01/2014
DRAWN: Y.Liu
PAGE: 1 OF 9
ERP: 1201008609



AA5630UMW46-W2
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or
damage the internal circuitry.
4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks.
4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup
and avoid damage during production.
5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.
SPEC NO: DSAN0336
APPROVED: WYNEC
REV NO: V.5B
CHECKED: Allen Liu
DATE: SEP/01/2014
DRAWN: Y.Liu
PAGE: 2 OF 9
ERP: 1201008609




@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)