PRODUCT DATASHEET
AAT3783
TM BatteryManager 1-A Linear Li-Ion/Polymer Battery Charger with 28V Over-Voltage Protection ...
PRODUCT DATASHEET
AAT3783
TM BatteryManager 1-A Linear Li-Ion/Polymer Battery Charger with 28V Over-
Voltage Protection www.DataSheet4U.com
General Description
The AAT3783 BatteryManagerâ„¢ is a single-cell LithiumIon (Li-Ion)/Li-Polymer battery charger IC, designed to operate from USB ports, AC adapter inputs, or from a charger adapter up to an input
voltage of 6.5V. For increased safety, the AAT3783 also includes over-
voltage input protection (OVP) up to 28V. The AAT3783 precisely regulates battery charge
voltage and current for 4.2V Li-Ion/Polymer battery cells through an extremely low RDS(ON) switch. When charged from an adapter or a USB port, the battery charging current can be set by an external resistor up to 1A. In the case of an over-
voltage condition in excess of 6.5V, a series switch opens preventing damage to the battery and charging circuitry. With the addition of an external resistor the OVP trip point can be programmed to a level other than the factory set value of 6.5V. In the case of an OVP condition a fault flag is activated. Battery charge state is continuously monitored for fault conditions. In the event of an over-current, battery over
voltage, short-circuit or over-temperature failure, the device will automatically shut down, thus protecting the charging device, control system and the battery under charge. A status monitor output pin is provided to indicate the battery charge status by directly driving an external LED. An open-drain power-source detection ...