ACPL-W314

ACPL-P314 and ACPL-W314 0.6 Amp Output Current IGBT Gate Driver Optocoupler Data Sheet Description The ACPL-P314/W314 consists of a GaAsP LED optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices. The voltage and current supplied by this optocoupler makes it ideally suited for directly driving small or medium power IGBTs. Functional Diagram ANODE 1 N.C. 2 CATHODE 3 SHIELD 6 VCC 5 VO 4 VEE Truth Table LED VO OFF LOW ON HIGH Note: A 0.1 µF bypass capacitor must be connected between pins VCC and VEE. Features High speed response. Ultra high CMR. Bootstrappable supply current. Available in Stretched SO-6 package Package Clearance/Creepage at 8mm (ACPL-W314) Safety Approval: UL Recognized with 3750 Vrms for 1 minute per UL1577. CSA Approved. IEC/EN/DIN EN 60747-5-2 Approved with VIORM = 630VPEAK for option 060. Specifications 0.6 A maximum peak output current. 0.4 A minimum peak output current. 0.7 µs maximum propagation delay over temperature range. ICC(max) = 3 mA maximum supply current. 10 kV/µs minimum common mode rejection (CMR) at VCM = 1000 V. Wide VCC operating range: 10 V to 30 V over temperature range. Wide operating temperature range: –40°C to 100°C. Applications Isolated IGBT/Power MOSFE...