ACPM-7813 CDMA/AMPS Power Amplifier Module
Data Sheet
Description
The ACPM-7813 is a fully matched CDMA Power amplifier...
ACPM-7813 CDMA/AMPS Power Amplifier Module
Data Sheet
Description
The ACPM-7813 is a fully matched CDMA Power amplifier module. Designed around Avago Technologies’ new Enhancement Mode pHEMT process, the ACPM-7813 offers premium performance in a very small form factor. Fully matched to 50 Ohms on the input and output.
The amplifier has excellent ACPR and efficiency performance at max Pout and low quiescent current with a single bias control
voltage. For even lower quiescent current, a dynamic bias control circuit can be used by varying the
voltage on the Vcntl pin between 1.2V to 2.5V.
Designed in a surface mount RF package, the ACPM7813 is cost and size competitive.
The ACPM-7813 is another key component of the Avago Technologies CDMAdvantage RF chipset.
Features
Operating frequency: 824– 849 MHz 28.5 dBm linear output power @ 3.4V High efficiency: 40% PAE Dynamic bias control for low midpower Idd Very low quiescent current with single control
voltage Internal 50 ohm matching networks for both RF IN/
OUT 3.2– 4.2V linear operation cdma2000 1xRTT capable Only 3 SMT parts needed 4.0 x 4.0 x 1.1 mm SMT package
Applications
CDMA handsets Datacards PDAs
Vdd1 Vbias
Vdd2
Input
Power Input Match
Bias Circuit
On Chip Inter-stage
Match
Passive Output Match
Output
Vcntl
Single control bias setting for low Idq and 40%PAE at Pout = 28.5 dBm
Maximum Ratings[1]
Parameter
Min. Max.
Vdd Supply
Voltage Power Dissipation [2]
6.0 V 2.5 W
Bias Current
1...