ACS706ELC-20A
Bidirectional 1.5 mΩ Hall Effect Based Linear Current Sensor IC with Voltage Isolation and 20 A Dynamic R...
ACS706ELC-20A
Bidirectional 1.5 mΩ Hall Effect Based Linear Current Sensor IC with
Voltage Isolation and 20 A Dynamic Range
Package LC
8
7
1
6
2
5
3
4
Pin 1: IP+ Pin 2: IP+ Pin 3: IP– Pin 4: IP–
Pin 5: GND Pin 6: VOUT Pin 7: VOUT Pin 8: VCC
Nominal Operating Temperature, TA Range E............................................ –40 to 85ºC
Overcurrent Transient Tolerance*, IP ................ 60 A
*100 total pulses, 250 ms duration each, applied at a rate of 1 pulse every 100 seconds.
ABSOLUTE MAXIMUM RATINGS
Supply
Voltage, VCC .......................................... 16 V Reverse Supply
Voltage, VRCC ........................ –16 V Output
Voltage, VOUT ........................................ 16 V Reverse Output
Voltage, VROUT...................... –0.1 V Output Current Source, IOUT(Source) ................. 3 mA Output Current Sink, IOUT(Sink).......................10 mA Maximum Transient Sensed Current*, IR(max) ... 100 A Operating Temperature,
Maximum Junction, TJ(max)....................... 165°C Storage Temperature, TS ...................... –65 to 170°C
*Junction Temperature, TJ < TJ(max).
The Allegro ACS706 family of current sensor ICs provides economical and precise solutions for current sensing in industrial, automotive, commercial, and communications systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, switch-mode power supplies, and overcurrent fault pro...
