ACS715

ACS715 Automotive Grade, Fully Integrated, Hall-Effect-Based Linear Current Sensor IC with 2.1 kVRMS Voltage Isolation and Low-Resistance Current Conductor FEATURES AND BENEFITS Low-noise analog signal path Device bandwidth is set via the FILTER pin 5 µs output rise time in response to step input current 80 kHz bandwidth Total output error 1.5% typical at TA = 25°C Small footprint, low-profile SOIC8 package 1.2 mΩ internal conductor resistance 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8 5.0 V, single supply operation 133 to 185 mV/A output sensitivity Output voltage proportional to DC currents Factory-trimmed for accuracy Extremely stable output offset voltage Nearly zero magnetic hysteresis Ratiometric output from supply voltage Operating temperature range, –40°C to 150°C TÜV America Certificate Number: U8V 15 05 54214 038 CB 13 06 54214 026 PACKAGE: 8-Pin SOIC (suffix LC) Not to scale DESCRIPTION The Allegro™ ACS715 provides economical and precise solutions for DC current sensing in automotive systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, switch-mode power supplies, and overcurrent fault protection. The device consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field whic...