Data Sheet
FEATURES
High relative accuracy (INL): ±2 LSB maximum @ 16 bits Tiny package: 3 mm × 3 mm, 16-lead LFCSP Tota...
Data Sheet
FEATURES
High relative accuracy (INL): ±2 LSB maximum @ 16 bits Tiny package: 3 mm × 3 mm, 16-lead LFCSP Total unadjusted error (TUE): ±0.1% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.1% of FSR maximum High drive capability: 20 mA, 0.5 V from supply rails User selectable gain of 1 or 2 (GAIN pin) Reset to zero scale or midscale (RSTSEL pin) 1.8 V logic compatibility 50 MHz SPI with readback or daisy chain Low glitch: 0.5 nV-sec Low power: 1.8 mW at 3 V 2.7 V to 5.5 V power supply −40°C to +105°C temperature range
APPLICATIONS
Digital gain and offset adjustment Programmable attenuators Process control (PLC I/O cards) Industrial automation Data acquisition systems
GENERAL DESCRIPTION
The AD5686/AD5684, members of the nanoDAC+™ family, are low power, quad, 16-/12-bit buffered
voltage output DACs. The devices include a gain select pin giving a full-scale output of 2.5 V (gain = 1) or 5 V (gain = 2). All devices operate from a single 2.7 V to 5.5 V supply, are guaranteed monotonic by design, and exhibit less than 0.1% FSR gain error and 1.5 mV offset error performance. The devices are available in a 3 mm × 3 mm LFCSP and a TSSOP package.
The AD5686/AD5684 also incorporate a power-on reset circuit and a RSTSEL pin that ensures that the DAC outputs power up to zero scale or midscale and remain at that level until a valid write takes place. Each part contains a per-channel power-down feature that reduces the current consumption of the device to 4 µA at 3 V...