AD6C941
1 Form A 60V / 250mΩ MOSFET Output Solid State Relay
Description
The AD6C941 is a bi-directional, single-pole, ...
AD6C941
1 Form A 60V / 250mΩ
MOSFET Output Solid State Relay
Description
The AD6C941 is a bi-directional, single-pole, single-throw, normally open multipurpose relay. It is designed to replace electro-mechanical relays in general purpose switching applications. The relay consists of an integrated circuit that drives two rugged drain-to-drain enhancement type DMOS transistors - optically coupled to a light emitting diode. The output MOS transistors have extremely low on resistance allowing the relay to high continuous load currents of up to 2.2 amps.
The AD6C941 comes standard in a miniature 6 pin DIP package making it ideal for high-density board applications.
Applications
Reed Relay Replacement Meter Reading Systems Data Acquisition Medical Equipment Battery Monitoring Safety Systems
Schematic Diagram
(+) Input 1
6 +/- Load
(-) Input 2
5 DC Connection
Do Not Use 3
AD6C941
4 -/+ Load
Features
Low On Resistance (75m TYP) Low Input Control Current (1mA TYP) High Maximum Continuous Load Current (2.2 Amps) High Isolation
Voltage (3.75kVRMS, 5kVRMS -H Option) Long Life / High Reliability RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL/C-UL: VDE:
File # E201932 File # 40035191 (EN 60747-5-2)
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional operation of the device is not implied at these or any conditions in excess of those defined in electrical characteristics section of this document. Exposure to absol...