AD9551

www.DataSheet4U.com Multiservice Clock Generator AD9551 FEATURES Translation between any two standard network rates Dual reference inputs and dual clock outputs Pin programmable for standard network rate translation SPI programmable for arbitrary rational rate translation Output frequencies from 10 MHz to 900 MHz Input frequencies from 19.44 MHz to 806 MHz On-chip VCO Meets OC-192 high band jitter generation requirement Supports standard forward error correction (FEC) rates Supports holdover operation Supports hitless switchover and phase build-out (even with unequal reference frequencies) SPI-compatible 3-wire programming interface Single supply (3.3 V) Reference conditioning and switchover circuitry internally synchronizes the two references so that if one reference fails, there is virtually no phase perturbation at the output. The AD9551 uses an external crystal and an internal DCXO to provide for holdover operation. If both references fail, the device maintains a steady output signal. The AD9551 provides pin-selectable, preset divider values for standard (and FEC adjusted) network frequencies. The pinselectable frequencies include any combination of 15 possible input frequencies and 16 possible output frequencies. A SPI interface provides further flexibility by making it possible to program almost any rational input/output frequency ratio. The AD9551 is a clock generator that employs fractional-N-based phase-locked loops (PLL) using sigma-delta (Σ-Δ) modulators (SDMs). ...