Data Sheet
36 V, 18 MHz, Low Noise, Fast Settling Single Supply, RRO, JFET Op Amp ADA4625-1/ADA4625-2
FEATURES
Wide ga...
Data Sheet
36 V, 18 MHz, Low Noise, Fast Settling Single Supply, RRO, JFET Op Amp ADA4625-1/ADA4625-2
FEATURES
Wide gain bandwidth product: 18 MHz typical High slew rate: 48 V/µs typical Low
voltage noise density: 3.3 nV/√Hz typical at 1 kHz Low peak-to-peak noise: 0.15 µV p-p, 0.1 Hz to 10 Hz Low input bias current: ±15 pA typical at TA = 25°C Low offset
voltage: ±80 µV maximum at TA = 25°C Offset
voltage drift: ±1.2 µV/°C maximum at TA = −40°C to 85°C Fast settling: 0.01% in 700 ns typical Wide range of operating
voltages
Dual-supply operation: ±2.5 V to ±18 V Single-supply operation: 5 V to 36 V Input
voltage range includes V− Rail-to-rail output High capacitive load drive capability Output short-circuit current: ±46 mA No phase reversal Unity-gain stable
APPLICATIONS
PLL filter
amplifiers Transimpedance
amplifiers Photodiode sensor interfaces Low noise charge
amplifiers
GENERAL DESCRIPTION
The ADA4625-1/ADA4625-2 build on Analog Devices, Inc., high
voltage, single-supply, rail-to-rail output (RRO), precision junction field effect transistor (JFET) input op amps, taking that product type to a level of speed and low noise that has not been made available to the market previously.
The ADA4625-1/ADA4625-2 provide optimal performance in high
voltage, high gain, and low noise applications. The input common-mode
voltage range includes the negative supply, and the output swings rail to rail. This enables the user to maximize dynamic input range in low
voltage, single supply app...