July 10, 2012 Ver 0.3
4-BIT SINGLE CHIP MICROCOMPUTERS
ADAM27CXX
USER`S MANUAL
• ADAM27C08 • ADAM27C16
1. Overview
ADAM27CXX
1. OVERVIEW
The ADAM27CXX is remote control transmitter which uses CMOS technology. The ADAM27CXX is suitable for remote control of TV, VCR, FANS, Air-conditioners, Audio Equipments, Toys, Games etc. The ADAM27PXX is MTP version.
1.1. Features
■ Program memory ● 1,024 bytes (1,024 x 8bit)
■ Data memory (RAM) ● 32 nibble (32 x 4bit)
■ 3 levels of subroutine nesting ■ 8-b.
4-BIT SINGLE-CHIP MICROCONTROLLERS
July 10, 2012 Ver 0.3
4-BIT SINGLE CHIP MICROCOMPUTERS
ADAM27CXX
USER`S MANUAL
• ADAM27C08 • ADAM27C16
1. Overview
ADAM27CXX
1. OVERVIEW
The ADAM27CXX is remote control transmitter which uses CMOS technology. The ADAM27CXX is suitable for remote control of TV, VCR, FANS, Air-conditioners, Audio Equipments, Toys, Games etc. The ADAM27PXX is MTP version.
1.1. Features
■ Program memory ● 1,024 bytes (1,024 x 8bit)
■ Data memory (RAM) ● 32 nibble (32 x 4bit)
■ 3 levels of subroutine nesting ■ 8-bit Table Read Instruction ■ Oscillator Type (Operating frequency)
● Internal RC Oscillator (typically 3.64MHz) ■ Instruction cycle
● fOSC/48 ■ Stop mode ■ Released stop mode by key input ■ Built in Power-on Reset circuit ■ Built in Transistor for I.R LED Drive
● IOL=250mA at VDD=3V and VO=0.3V ■ Built in Low Voltage reset circuit ■ Built in a watch dog timer (WDT) ■ Low operating voltage
● 1.8 ~ 3.6V ■ 8/16-SOP Package.
Series Program memory
Data memory I/O ports
Output ports Package
ADAM27C16
ADAM27C08
1,024 x 8
1,024 x 8
32 x 4
32 x 4
13 5
11
16SOP(150mil)
8SOP(150mil)
Table 1.1 ADAM27CXX series members
Page 1 of 36
ADAM27CXX
1.2. Block Diagram
ROUT
ADAM27 Core
Watchdog Timer
Carry Generator
RAM (32 nibble)
K0~K3 R0~R2 P0~P3
Key Scan &
Input
Clock Gen. &
System Control
VDD GND
ROM (1K bytes)
Internal RC Oscillator (3.64MHz)
1. Overview
K Port
R Port
P Port
CS Port
K0 ~ K3 R0 ~ R2 P0 ~ P3 CS0 ~ CS1
1.3. Pin Assignments ( top view )
GND CS1
K0 K1 K2 K3 R0 R1.