ADE7761

www.DataSheet4U.com Energy Metering IC with On-Chip Fault and Missing Neutral Detection ADE7761 FEATURES High accuracy active energy measurement IC, supports IEC 687/61036 Less than 0.1% error over a dynamic range of 500 to 1 Supplies active power on the frequency outputs F1 and F2 High frequency output CF is intended for calibration and supplies instantaneous active power Continuous monitoring of the phase and neutral current allows fault detection in 2-wire distribution systems Current channels input level best suited for current transformer sensors Uses the larger of the two currents (phase or neutral) to bill—even during a fault condition Continuous monitoring of the voltage and current inputs allows missing neutral detection Uses one current input (phase or neutral) to bill when missing neutral is detected Two logic outputs (FAULT and REVP) can be used to indicate a potential miswiring, fault, or missing neutral condition Direct drive for electromechanical counters and 2-phase stepper motors (F1 and F2) Proprietary ADCs and DSP provide high accuracy over large variations in environmental conditions and time Reference 2.5 V ± 8% (drift 30 ppm/°C typical) with external overdrive capability Single 5 V supply, low power GENERAL DESCRIPTION The ADE7761 is a high accuracy, fault tolerant, electrical energy measurement IC intended for use with 2-wire distribution systems. The part specifications surpass the accuracy requirements as quoted in the IEC61036 standard. The only an...