Multiplexers
FEATURES
33 V supply range 130 Ω on resistance Fully specified at ±15 V/+12 V 3 V logic-compatible inputs Rail-to-rail o...
Description
FEATURES
33 V supply range 130 Ω on resistance Fully specified at ±15 V/+12 V 3 V logic-compatible inputs Rail-to-rail operation Break-before-make switching action 16-lead TSSOP and 16-lead SOIC_N Upgrade for the ADG508A/ADG509A
APPLICATIONS
Audio and video routing Test equipment Data acquisition systems Battery-powered systems Communication systems Signal routing
4- and 8-Channel ±15 V/+12 V Multiplexers
ADG1308/ADG1309
FUNCTIONAL BLOCK DIAGRAMS
ADG1308
ADG1309
S1
S1A
DA
S4A
D
S1B DB
S8
S4B
1-OF-8 DECODER
1-OF-4 DECODER
06009-001
A0 A1 A2 EN
Figure 1.
A0 A1 EN
GENERAL DESCRIPTION
The ADG1308 and ADG1309 are monolithic analog multiplexers consisting of eight single channels and four differential channels, respectively. The ADG1308 switches one of eight inputs to a common output as determined by the 3-bit binary address lines A0, A1, and A2. The ADG1309 switches one of four differential inputs to a common differential output as determined by the 2-bit binary address lines A0 and A1. An EN input on both devices is used to enable or disable the device. When disabled, all channels are switched off.
When the switches are on, each switch conducts equally well in both directions and has an input signal range that extends to the power supplies. In the off condition, signal levels up to the supplies are blocked. All switches exhibit break-before-make switching action for use in multiplexer applications. Inherent in the design is the low charge injection for minimum...
Similar Datasheet