ADIS16100

www.DataSheet4U.com ±300°/sec Yaw Rate Gyro with SPI Interface ADIS16100 FEATURES Complete angular rate gyroscope Z-axis (yaw rate) response SPI® digital output interface High vibration rejection over wide frequency 2000 g powered shock survivability Externally controlled self test Internal temperature sensor output Dual auxiliary 12-bit ADC inputs Absolute rate output for precision applications 5 V single-supply operation 8.2 mm × 8.2 mm × 5.2 mm package GENERAL DESCRIPTION The ADIS16100 is a complete angular rate sensor (gyroscope) that uses the Analog Devices surface-micromachining process to make a functionally complete angular rate sensor with an integrated serial peripheral interface (SPI). The digital data available at the SPI port is proportional to the angular rate about the axis normal to the top surface of the package (see Figure 19). A single external resistor can be used to increase the measurement range. An external capacitor can be used to lower the bandwidth. Access to an internal temperature sensor measurement is provided, through the SPI, for compensation techniques. Two pins are available to the user to input analog signals for digitization. An additional output pin provides a precision voltage reference. Two digital self-test inputs electromechanically excite the sensor to test operation of the sensor and the signal conditioning circuits. The ADIS16100 is available in an 8.2 mm × 8.2 mm × 5.2 mm, 16-terminal, peripheral land grid array (LGA) package. AP...