Data Sheet
3.3 V, 200 Mbps, Half- and Full-Duplex, High Speed M-LVDS Transceivers
ADN4691E/ADN4693E/ADN4696E/ADN4697E
...
Data Sheet
3.3 V, 200 Mbps, Half- and Full-Duplex, High Speed M-LVDS Transceivers
ADN4691E/ADN4693E/ADN4696E/ADN4697E
FEATURES
Multipoint LVDS transceivers (low
voltage differential signaling driver and receiver pairs)
Switching rate: 200 Mbps (100 MHz) Supported bus loads: 30 Ω to 55 Ω Choice of 2 receiver types
Type 1 (ADN4691E/ADN4693E): hysteresis of 25 mV Type 2 (ADN4696E/ADN4697E): threshold offset of 100 mV
for open-circuit and bus-idle fail-safe Conforms to TIA/EIA-899 standard for M-LVDS Glitch free power-up/power-down on M-LVDS bus Controlled transition times on driver output Common-mode range: −1 V to +3.4 V, allowing
communication with 2 V of ground noise Driver outputs high-Z when disabled or powered off Enhanced ESD protection on bus pins
±15 kV HBM (human body model), air discharge ±8 kV HBM (human body model), contact discharge ±10 kV IEC 61000-4-2, air discharge ±8 kV IEC 61000-4-2, contact discharge Operating temperature range: −40°C to +85°C Available...