Analog-to-Digital Converter
BurrĆBrown Products from Texas Instruments
ADS5237
SBAS420A – AUGUST 2007 – REVISED OCTOBER 2007
Dual, 10-Bit, 65MSPS,...
Description
BurrĆBrown Products from Texas Instruments
ADS5237
SBAS420A – AUGUST 2007 – REVISED OCTOBER 2007
Dual, 10-Bit, 65MSPS, +3.3V Analog-to-Digital Converter
FEATURES
1
2 Single +3.3V Supply High SNR: 61.7dBFS at fIN = 5MHz Total Power Dissipation:
Internal Reference: 366mW External Reference: 330mW Internal or External Reference Low DNL: ±0.1LSB Flexible Input Range: 1.5VPP to 2VPP TQFP-64 Package
APPLICATIONS
Communications IF Processing Communications Base Stations Test Equipment Medical Imaging Video Digitizing CCD Digitizing
DESCRIPTION
The ADS5237 is a dual, high-speed, high dynamic range, 10-bit, pipelined analog-to-digital converter (ADC). This device includes a high-bandwidth sample-and-hold amplifier that gives excellent spurious performance up to and beyond the Nyquist rate. The differential nature of the sample-and-hold amplifier and ADC circuitry minimizes even-order harmonics and gives excellent common-mode noise immunity.
The ADS5237 provides for setting the full-scale range of the converter without any external reference circuitry. The internal reference can be disabled, allowing low-drive, external references to be used for improved tracking in multichannel systems.
The ADS5237 provides an over-range indicator flag to indicate an input signal that exceeds the full-scale input range of the converter. This flag can be used to reduce the gain of front-end gain control circuitry. There is also an output enable pin to allow for multiplexing...
Similar Datasheet