E-pHEMT MMIC
Product Features
0B 1B
AE514 (Preliminary)
Application
• Low Noise Amplifier for CATV, Satellite • Cable M...
E-pHEMT MMIC
Product Features
0B 1B
AE514 (Preliminary)
Application
Low Noise Amplifier for CATV, Satellite Cable Modem FTTH (G-PON, GE-PON) Optical node
www.DataSheet4U.com
Small size Higher Gain Higher linearity SOIC-8 SMD Type package Higher productivity Lower manufacturing cost -70dBc CSO 79 Channels @ +39dBmV/ch -63dBc CTB 79 Channels @ +39dBmV/ch -56dBc XMD 79 Channels @ +39dBmV/ch Low Noise Figure
Package : SOIC-8
Description
2B
AE514 is designed as low cost drive
amplifiers for many applications including FTTH, CATV System. This MMIC is based on Gallium Arsenide Enhancement Mode pHEMT which shows low current draw and very low noise. The data in this spec sheet is valid only for 75 ohm application. 50 ohm data is in a separate spec sheet.
Specifications
3B
PARAMETER
4B
UNIT MHz dB dB dB dB dBm dBm dB dBc
MIN
TYP 50 ~ 2150
MAX
Condition
Frequency Gain Flatness Input Return Loss Output Return Loss Output IP3 1dB Compression Point Noise Figure CSO CTB XMOD CSO CTB XMOD DC Current NOTE 30 ~ 870MHz 30 ~ 870MHz
16
18 1
-8 -8 37 22
-20 -20 40 25 2.5 -70 -63 -56 -65 -66 -58 205 4 -65 -58 -51 -60 -60 -53 Vdd = 5.0V 135 channel, +37dBmV/ch 79 channel, +39dBmV/ch At 500MHz/10dBm 2tone At 500MHz
dBc dBc dBc dBc dBc mA
1. Test conditions unless otherwise noted. Test Freq = 500MHz, T=25℃, Vdd=5V, 75Ω system 2. OIP3 measured with 2 tones at an output power of +10dBm/tone separated by 1MHz, Test Freq = 500MHz
Absolute Minimum and Maximu...