AH175
HALL EFFECT LATCH FOR HIGH TEMPERATURE
Features
• • • • • • • • • Bipolar Hall Effect Latch Sensor 3.5V to 20V DC...
AH175
HALL EFFECT LATCH FOR HIGH TEMPERATURE
Features
Bipolar Hall Effect Latch Sensor 3.5V to 20V DC Operation
Voltage Open Collector Pre-Driver 25mA Output Sink Current Chip Power Reverse-Connection Protection o o Operating Temperature: -40 C~150 C Lead Free Finish/RoHS Compliant for Lead Free products (Note 1) Lead Free Packages: SIP-3L, SC59-3L Green Package: SC59-3L
General Description
AH175 is a single-digital-output Hall-effect sensor for high temperature operation. The device includes an on-chip Hall
voltage generator for magnetic sensing, an amplifier to amplify Hall
voltage, and a comparator to provide switching hysteresis for noise rejection, and an open-collector output pre-driver. An internal band-gap regulator is used to provide temperature compensated supply
voltage for internal circuits and allows a wide operating supply range. While the magnetic flux density (B) is larger than threshold Bop, the OUT pin turns on (low). If B removed toward Brp, the OUT pin is latched “on” state prior to B < Brp. When B < Brp, the OUT pin goes into “off ” state.
Applications
Rotor Position Sensing Current Switch Encoder RPM Detection
Ordering Information
AH175 - X X X - X
Package P: SIP-3L W: SC59-3L
Lead-Free L : Lead Free G : Green (Note 3)
Packing
- 7 : Taping -B : Bulk (Note 4) -A : Ammo Box (Note 5)
Magnetic Characteristics A or B
Note:
1.
RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive A...