24bit A/D and D/A converter
www.DataSheet4U.com ASAHI KASEI
[AKD4552-A]
AKD4552-A
Evaluation board Rev.0 for AK4552
GENERAL DESCRIPTION AKD4552-A ...
Description
www.DataSheet4U.com ASAHI KASEI
[AKD4552-A]
AKD4552-A
Evaluation board Rev.0 for AK4552
GENERAL DESCRIPTION AKD4552-A is an evaluation board for the digital audio 24bit A/D and D/A converter, AK4552. The AKD4552-A can evaluate A/D converter and D/A converter separately in addition to loopback mode (A/D → D/A). The A/D section can be evaluated by interfacing with AKM’s DAC evaluation boards directly. The AKD4552-A has the interface with AKM’s ADC evaluation boards. Therefore, it’s easy to evaluate the D/A section. The AKD4552-A also has the digital audio interface and can achieve the interface with digital audio systems via opt-connector. Ordering guide
AKD4552-A --Evaluation board for AK4552
FUNCTION DIT/DIR with optical input/output BNC connector for an external clock input
2.4 ~ 4.0V GND
LIN RIN AK4112B (DIR) Opt In
AK4552
LOUT ROUT AK4103A (DIT) Opt Out
A/D, D/A Data 10pin Header
Clock Generator
Figure 1. AKD4552-A Block Diagram * Circuit diagram and PCB layout are attached at the end of this manual.
-1-
2005/10
www.DataSheet4U.com ASAHI KASEI
[AKD4552-A]
Analog Input Circuit
External analog signal fed through the BNC connector is terminated by a resistor of 560 ohms. The resistor value should be properly selected in order to meet the output impedance of the signal source.
J4(J2) LIN(RIN) C4(C2) 10u LIN(RIN)pin +
R6(R4) 560
Figure 2. Input buffer circuit on board * AKM assumes no responsibility for the trouble when using the circuit exampl...
Similar Datasheet