AL8861Q
HIGH EFFICIENCY 40V 1.5A AUTOMOTIVE GRADE BUCK LED DRIVER
Description
The AL8861Q is a hysteresis mode DC-DC st...
AL8861Q
HIGH EFFICIENCY 40V 1.5A AUTOMOTIVE GRADE BUCK LED DRIVER
Description
The AL8861Q is a hysteresis mode DC-DC step-down LED driver, designed for driving single or multiple series of the connected LEDs efficiently from a
voltage source higher than the LED
voltage. The device can operate with an input supply from 4.5V to 40V and provide an externally adjustable output current up to 1.5A for the MSOP-8EP package. Depending upon supply
voltage and external components, this converter can provide up to 40W of output power.
The AL8861Q integrates the power switch and a high-side output current sensing circuit, which uses an external resistor to set the nominal average output current.
Dimming can be realized by applying an external control signal to the VSET pin. The VSET pin will accept either a DC
voltage signal or a PWM (pulse-width modulation) signal.
The soft-start time can be adjusted by an external capacitor from the VSET pin to the ground. Applying a
voltage of 0.2V or lower to the VSET pin can turn off the output and make the device enter into standby state with low power consumption.
Pin Assignments
MSOP-8EP
ISENSE 1 GND 2 EP GND 3 VSET 4
Top View
Applications
Automotive interior LED lamps Automotive exterior LED lamps
The AL8861Q is qualified to AEC-Q100 Grade 1 and is automotive grade to support PPAPs.
Features
Wide Input-
Voltage Range: 4.5V to 40V Output Current Up to 1.5A Internal 40V NDMOS Switch Typical 5% Output Current Accuracy Single Pin fo...