plerowTM ALN1300
Internally Matched LNA Module
C o u pl er
C o u pl er
Features
· S21 = 40.0 dB@1200 MHz = 39.0 dB@140...
plerowTM ALN1300
Internally Matched LNA Module
C o u pl er
C o u pl er
Features
· S21 = 40.0 dB@1200 MHz = 39.0 dB@1400 MHz
· NF of 0.7 dB over Frequency · Unconditionally Stable · Single 5 V Supply · High OIP3@Low Current
Description
The plerowTM ALN-series is the compactly designed surface-mount module for the use of the LNA with or without the following gain blocks in the infrastructure equipment of the mobile wireless (CDMA, GSM, PCS, PHS, WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communication terminals, CATV and so on. It has an exceptional performance of low noise figure, high gain, high OIP3, and low bias current. The stability factor is always kept more than unity over the application band in order to ensure its unconditionally stable implementation to the application system environment. The surface-mount module package including the completed matching circuit and other components necessary just in case allows very simple and convenient implementation onto the system board in mass production level.
Specifications (in Production)
Typ.@T = 25 C, Vs = 5 V, Freq. = 1300 MHz, Zo.sys = 50 ohms
Parameter
Specifications Unit
Min Typ Max
Frequency Range
MHz
1200
1400
Gain
dB 38.5 39.5
Gain Flatness
dB
0.5 0.6
Noise Figure
dB
0.7 0.75
Output IP3
dBm 35 36
S11/S22
dB
-15/-15
Output P1dB
dBm 19 20
Switching Time (3)
sec
-
Supply Current
mA
160 180
Supply
Voltage
V
5
Impedance
50
Max. RF Input Power
dBm
C.W 23~25 (before fail)
...