ALN2150AT

plerowTM ALN2150AT Internally Matched LNA Module Features · S21 = 14.5 dB@2000 MHz = 13.5 dB@2300 MHz · NF of 0.6 dB over Frequency · Unconditionally Stable · Single 5 V Supply · High OIP3@Low Current Description The plerowTM ALN-series is the compactly designed surface-mount module for the use of the LNA with or without the following gain blocks in the infrastructure equipment of the mobile wireless (CDMA, GSM, PCS, PHS, WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communication terminals, CATV and so on. It has an exceptional performance of low noise figure, high gain, high OIP3, and low bias current. The stability factor is always kept more than unity over the application band in order to ensure its unconditionally stable implementation to the application system environment. The surface-mount module package including the completed matching circuit and other components necessary just in case allows very simple and convenient implementation onto the system board in mass production level. Specifications (in Production) Typ.@T = 25 C, Vs = 5 V, Freq. = 2150 MHz, Zo.sys = 50 ohms Parameter Specifications Unit Min Typ Max Frequency Range MHz 2000 2300 Gain dB 13 14 Gain Flatness dB 0.5 0.6 Noise Figure dB 0.6 0.65 Output IP3 (1) dBm 31 32 S11 / S22 (2) dB -18 / -9 Output P1dB dBm 18 19 Switching Time (3) sec Supply Current mA 65 75 Supply Voltage V 5 Impedance  50 Max. RF Input Power Package Type & Size dBm mm C.W 29~31 (before fail...