AMIS-40616

AMIS-40616 LIN Transceiver with 5V Voltage Regulator 1.0 General Description Data Sheet The AMIS-40616 is a full-featured local interconnect network (LIN) transceiver designed to interface between a LIN protocol controller and the physical bus. The transceiver is implemented in AMI Semiconductor’s SmartPower, high-voltage, mixed-signal 0.35µm CMOS technology enabling both high-voltage analog circuitry and digital functionality to co-exist on the same chip. The AMIS-40616 LIN device is a member of AMI Semiconductor’s in-vehicle networking (IVN) transceiver family and integrates a LIN v2.0 physical transceiver and a 5V voltage regulator. It is designed to work in harsh automotive environments and is certified to the TS16949 qualification flow. The LIN bus is designed to communicate low rate data from control devices such as door locks, mirrors, car seats, and sunroofs at the lowest possible cost. The bus is designed to eliminate as much wiring as possible and is implemented using a single wire in each node. 2.0 Key Features 2.1 LIN-Bus Transceiver LIN compliant to specification revision 2.0 (backwards compatible to version 1.3) and J2602 SmartPower, high-voltage, mixed-signal 0.35µ CMOS technology Bus voltage ± 45V Transmission rate up to 20kBaud SOIC 14 Green package 2.2 Protection Thermal shutdown Indefinite short-circuit protection of pins LIN and WAKE to supply and ground Load dump protection (45V) Bus pins protected against transients in an automoti...