AN365

AN364 Series Specifications Nut - Self Locking, Thin, 250°F 33 Dash Numbers TAP A Steel Copper Base Aluminum Alloy Alloy T ± .016 FINE THREAD 1032 B1032 D1032 #10-32 NF-3 0.172 428 B428 D428 1/4-28 NF-3 0.203 524 B524 D524 5/16-24 NF-3 0.250 624 B624 D624 3/8-24 NF-3 0.266 720 B720 D720 7/16-20 NF-3 0.312 820 B820 D820 1/2-20 NF-3 0.312 918 B918 D918 9/16-18 NF-3 0.359 1018 B1018 D1018 5/8-18 NF-3 0.391 1216 B1216 D1216 3/4-16 NF-3 0.406 1414 B1414 D1414 7/8-14 NF-3 0.469 1614 B1614 D1614 1-14 NF-3 0.562 1812 B1812 D1812 1 1/8-12 NF-3 0.656 2012 B2012 D2012 1 1/4-12 NF-3 0.750 COARSE THREAD 632 - D632 #6-32 NC-2 0.125 832 - D832 #8-32 NC-2 0.172 B +.002 -.010 0.375 0.438 0.500 0.563 0.625 0.750 0.875 0.938 1.063 1.250 1.438 1.625 1.813 0.312 0.344 All dimensions are in inches. (a) Minimum A not specified. Limited only by strength requirement of specification. For definition and application of drawing status note see ANA bulletin No. 337. Add “A” after dash number for nuts having non-metallic inserts. Add “C” after dash number for nuts fabricated entirely from metal. Examples of part numbers: AN364-428 = 1/4-28 steel nut, either all metal or with non-metallic insert. AN364D428 = 1/4-28 aluminum alloy nut, either all metal or non-metallic insert. AN364B428A = 1/4-28 copper base alloy nut with non-metallic insert. AN364-428C = 1/4-28 steel nut, all metal. For installation instructions, see drawing AND10068. AN365 Series Specific...