AND190HW

www.DataSheet4U.com AND190HW Ultra Bright LED Lamps Weight: 1.0g Unit: mm AND190HW InGaN High Brightness White Light Emission T-3 Package (10 mm) Features New emission material (InGaN) white LED All plastic mold type, clear colorless lens Low drive current, (forward current = 1 to 20 mA) Excellent On-Off contrast ratio Fast response time, capable of pulse operation High power luminous intensity Suitable for Outdoor Message Signboards, Automotive use. 10.0±0.2 11.0±0.3 0.5 1.5 MIN. 27.0 MIN. 13.5 ± 0.3 2.0±0.2 Maximum Ratings (Ta = 25°C) Characteristics Symbol IF VR PD TOpr TStg 2.54 Cathode Index Rating 30 5 108 -40 to 85 -40 to 85 Unit mA V mW °C °C Forward Current Reverse Voltage 0.5 1 2 Power Dissipation Operating Temperature Range 1. Anode 2. Cathode Storage Temperature Range Electro-Optical Characteristics (Ta = 25°C) Characteristics Forward Voltage Reverse Current Luminous Intensity Chromaticity Coordinates Full Viewing Angle Symbol VF IR IV x y θ Test Condition IF = 20 mA VR = 5 V IF = 20 mA IF = 10 mA IF = 10 mA IV = 1/2 Peak Minimum – – 3,300 – – – Typical 3.7 – 6,000 0.33 0.34 40 Maximum 4.3 10 – – – – Unit V µA mcd degree Precaution Please be careful of the following: 1. Soldering temperature: 260°C max Soldering time: 5 sec. max Soldering portion of lead: up to 1.6 mm from the body of the device 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead ...