Features
www.DataSheet4U.com • Programmable 33,554,432 x 1-bit Serial Memories Designed to Store Configuration
Programs...
Features
www.DataSheet4U.com Programmable 33,554,432 x 1-bit Serial Memories Designed to Store Configuration
Programs for Field Programmable Gate Arrays (FPGAs)
3.3V Output Capability 5V Tolerant I/O Pins Program Support using the Atmel ATDH2200E System or Industry Third Party
Programmers
In-System Programmable (ISP) via 2-wire Bus Simple Interface to SRAM FPGAs Compatible with Atmel AT40K and AT94K Devices, Altera® FLEX®, APEX™ Devices,
Stratix™, Lattice Semiconductor® (ORCA®) FPGAs, Spartan®, Virtex™ FPGAs Cascadable Read-back to Support Additional Configurations or Higher-density Arrays Low-power
CMOS FLASH Process Available in 44-lead PLCC Package Emulation of Atmel’s AT24CXXX Serial EEPROMs Low-power Standby Mode Single Device Capable of Holding 4 Bit Stream Files Allowing Simple System Reconfiguration Fast Serial Download Speeds up to 33 MHz Endurance: 10,000 Write Cycles Typical LHF Package Available (Lead and Halide Free)
FPGA Configuration Flash Memory AT17F32
1. Description
The AT17F Series of In-System Programmable Configuration PROMs (Configurators) provide an easy-to-use, cost-effective configuration memory for Field Programmable Gate Arrays. The AT17F Series device is packaged in the 44-lead PLCC, see Table 11. The AT17F Series Configurator uses a simple serial-access procedure to configure one or more FPGA devices. The AT17F Series Configurators can be programmed with industry-standard programmers, Atmel’s ATDH2200E Programm...