ATtiny214

ATtiny212/214/412/414/416 tinyAVR® 1-series Introduction The ATtiny212/214/412/414/416 are members of the tinyAVR®1-series of microcontrollers, using the AVR® processor with hardware multiplier, running at up to 20 MHz, with 2/4 KB Flash, 128/256 bytes of SRAM, and 64/128 bytes of EEPROM in a 8-, 14-, and 20-pin package. The tinyAVR®1-series uses the latest technologies with a flexible, lowpower architecture, including Event System, accurate analog features, and Core Independent Peripherals (CIPs). Attention:  Automotive products are documented in separate data sheets. Features CPU – AVR® CPU – Running at up to 20 MHz – Single-cycle I/O access – Two-level interrupt controller – Two-cycle hardware multiplier Memories – 2/4 KB In-system self-programmable Flash memory – 64/128 bytes EEPROM – 128/256 bytes SRAM – Write/erase endurance: Flash 10,000 cycles EEPROM 100,000 cycles – Data retention: 40 years at 55°C System – Power-on Reset (POR) – Brown-out Detector (BOD) – Clock options: 16/20 MHz low-power internal RC oscillator 32.768 kHz Ultra Low-Power (ULP) internal RC oscillator 32.768 kHz external crystal oscillator External clock input – Single-Pin Unified Program and Debug Interface (UPDI) – Three sleep modes: Idle with all peripherals running for immediate wake-up Standby © 2020 Microchip Technology Inc. Complete Datasheet DS40002287A-page 1 ATtiny212/214/412/414/416 – Configurable operation of selected peripherals Power-Down with full data re...