Features
• Capability of Single-wire Operation • Hardware Fault Recognition • Inputs with High Common-mode and Different...
Features
Capability of Single-wire Operation Hardware Fault Recognition Inputs with High Common-mode and Differential-mode Interference Rejection Above
100 VPP due to External Filters at the Receiver Input
Immunity Against Electromagnetic Interference Immunity Against Ground-
voltage Offsets < 6 V Ruggedized Against ESD by MIL-STD-883C, Method 3015
Benefits
Systems which employ this device have the following benefits compared to solutions using discrete components: High Reliability
CAN Transceiver IC B10011S
Applications
Especially Suited for Truck and Van Applications Interface Between Truck and Trailer Interface Between Dashboard and Engine
Description
The CAN driver IC B10011S is a low-speed, high-level interface for 24 V (27 V) operation with transmission levels according to ISO WD 11992-1 (point-to-point interface between trucks and trailers). It is developed for signal levels of 8/16 V and a speed of up to 250 kbits/s.
www.DataSheet4U.com
This device allows transmission, that is insensitive to electromagnetic interference. Such interferences may especially occur in truck applications where (due to the length of the wires) high common-mode
voltages (e.g., 50 ) can be coupled into the lines. This device contains a fault recognition circuit that detects faults on one of the two wires, which are normally used for transmission. If a fault occurs the operation can be switched from double-wire to single-wire mode thus, allowing proper operation even if...