Optical disc ICs
4-channel BTL driver for CD players
BA6397FP
The BA6397FP is a 4-channel BTL driver for CD player motors and actuators. The 5V regulator and internal standard operational amplifier make this IC suited to a broad range of applications.
FApplications CD players and CD-ROM drives
FFeatures 1) HSOP 28-pin package allows for miniaturization of applications. 2) Low number of external components. 3) Driver gain is adjustable with a single attached resistor. FAbsolute maximum ratings.
4-channel BTL driver for CD players
Optical disc ICs
4-channel BTL driver for CD players
BA6397FP
The BA6397FP is a 4-channel BTL driver for CD player motors and actuators. The 5V regulator and internal standard operational amplifier make this IC suited to a broad range of applications.
FApplications CD players and CD-ROM drives
FFeatures 1) HSOP 28-pin package allows for miniaturization of applications. 2) Low number of external components. 3) Driver gain is adjustable with a single attached resistor. FAbsolute maximum ratings (Ta = 25_C)
4) Internal 5V regulator. (requires attached PNP transistor) 5) Internal standard operational amplifier. 6) Internal thermal shutdown circuit.
FRecommended operating conditions (Ta = 25_C)
332
Optical disc ICs
BA6397FP
FBlock diagram
333
Optical disc ICs
FPin descriptions
BA6397FP
334
Optical disc ICs
FInput / output circuits
BA6397FP
335
Optical disc ICs
FElectrical characteristics (unless otherwise noted, Ta = 25_C, VCC = 8V, f = 1kHz, RL = 8Ω)
BA6397FP
FCircuit operation (1) Driver Inputs to the IC are the focus tracking error signal from the servo preamplifier and the control signal from the motor. The input signals, which normally center on 2.5V, are V / I converted by the preamplifier, generating a current corresponding to the input voltage. This current is
passed through a resistor and into the internal reference voltage component, the preamplifier output being a signal centering on the internal reference voltage. Two systems (positive phase and neg.