Datasheet
USB Type-C Power Delivery Controller
BM92A13MWV-Z
General Description
BM92A13 is a full function USB Type-C...
Datasheet
USB Type-C Power Delivery Controller
BM92A13MWV-Z
General Description
BM92A13 is a full function USB Type-C Power Delivery (PD) controller that supports USB Power Delivery using base-band communication. It is compatible with USB Type-C Specification and USB Power Delivery specification. BM92A13 includes support for the PD policy engine and communicates with an Embedded Controller or the SoC
via host interface. It supports SOP, SOP’ and SOP’’ signaling, allowing it to communicate with cable marker ICs, support alternate modes.
Key Specifications
VBUS
Voltage Range:
4.75V to 20V
Power Sink
Voltage Range:
4.75V to 20V
Power Source
Voltage Range:
4.75V to 5.5V
Power Consumption at Sleep Power: 0.4mW(Typ)
Operating Temperature Range: -30°C to +105°C
Package UQFN40V5050A
W (Typ) x D (Typ) x H (Max) 5.00mm x 5.00mm x 1.00mm
Features
USB Type-C Specification compatible
USB PD Specification compatible (BMC-PHY) Connected the required initial
voltage is 15V Request current depends on the far-end device Start of automatic power receiving without Ext-MCU
Two channel power path control using N-channel
MOSFET drivers with back flow prevention
Type-C cable orientation detection Built-in VCONN Switch and VCONN controller
Direct VBUS powered operation Initial Role is UFP mode (Supports DFP/DRP mode) Supports Dead Battery operation SMBus Interface for Host Communication
Applications
Consumer Applications Laptop PCs, Tablet PCs
Typi...