BQ2004E

bq2004E/H Fast-Charge ICs Features ➤ Fast charge and conditioning of nickel cadmium or nickel-metal hydride batteries ➤ Hysteretic PWM switch-mode current regulation or gated control of an external regulator ➤ Easily integrated into systems or used as a stand-alone charger ➤ Pre-charge qualification of temperature and voltage ➤ Configurable, direct LED outputs display battery and charge status ➤ Fast-charge termination by ∆ temperature/∆ time, peak volume detection, -∆V, maximum voltage, maximum temperature, and maximum time ➤ Optional top-off charge and pulsed current maintenance charging ➤ Logic-level controlled low-power mode (< 5µA standby current) General Description The bq2004E and bq2004H Fast Charge ICs provide comprehensive fast charge control functions together with high-speed switching power control circuitry on a monolithic CMOS device. Integration of closed-loop current control circuitry allows the bq2004 to be the basis of a cost-effective solution for stand-alone and systemintegrated chargers for batteries of one or more cells. Switch-activated discharge-beforecharge allows bq2004E/H-based chargers to support battery conditioning and capacity determination. High-efficiency power conversion is accomplished using the bq2004E/H as a hysteretic PWM controller for switch-mode regulation of the charging current. The bq2004E/H may alternatively be used to gate an externally regulated charging current. Fast charge may begin on application of the charging supply, rep...