bq2060A
www.ti.com
SLUS500D – OCTOBER 2001 – REVISED OCTOBER 2011
SBS v1.1-Compliant Gas Gauge IC
Check for Samples: b...
bq2060A
www.ti.com
SLUS500D – OCTOBER 2001 – REVISED OCTOBER 2011
SBS v1.1-Compliant Gas Gauge IC
Check for Samples: bq2060A
FEATURES
1
Provides Accurate Measurement of Available Charge in NiCd, NiMH, Li-Ion, and Lead-Acid Batteries
Supports SBS Smart Battery Data Specification v1.1
Supports the 2-Wire SMBus v1.1 Interface With PEC or 1-Wire HDQ16
Reports Individual Cell
Voltages
Monitors and Provides Control to Charge and Discharge FETs in Li-Ion Protection Circuit
Provides 15-Bit Resolution for
Voltage, Temperature, and Current Measurements
Measures Charge Flow Using a V-to-F Converter With Offset of Less Than 16 µV After Calibration
Consumes Less Than 0.5 mW Operating
Drives a 4- or 5-Segment LED Display for Remaining Capacity Indication
28-Pin 150-Mil (3,8-mm) SSOP
DESCRIPTION
The bq2060A SBS-compliant gas gauge IC for battery pack or in-system installation maintains an accurate record of available charge in rechargeable batteries. The bq2060A monitors capacity and other critical battery parameters for NiCd, NiMH, Li-ion, and lead-acid chemistries. The bq2060A uses a
voltage-to-frequency converter with automatic offset error correction for charge and discharge counting. For
voltage, temperature, and current reporting, the bq2060A uses an A-to-D converter. The onboard ADC also monitors individual cell
voltages in a Li-ion battery pack and allows the bq2060A to generate control signals that may be used with a pack supervisor to enhance pack safety.
T...