bq24155
www.ti.com
SLUS942 – FEBRUARY 2010
Fully Integrated Switch-Mode One-Cell Li-Ion Charger with Full USB Complia...
bq24155
www.ti.com
SLUS942 – FEBRUARY 2010
Fully Integrated Switch-Mode One-Cell Li-Ion Charger with Full USB Compliance
Check for Samples: bq24155
FEATURES
1
2 Charge Faster than Linear Chargers High-Accuracy
Voltage and Current Regulation
– Input Current Regulation Accuracy: ±5% (100 mA and 500 mA)
– Charge
Voltage Regulation Accuracy: ±0.5% (25°C), ±1% (0°C-125°C)
– Charge Current Regulation Accuracy: ±5% High-Efficiency Mini-USB/AC Battery Charger
for Single-Cell Li-Ion and Li-Polymer Battery Packs 20-V Absolute Maximum Input
Voltage Rating 6-V Maximum Operating Input
Voltage Built-In Input Current Sensing and Limiting Integrated Power FETs for Up To 1.25-A Charge Rate Programmable Charge Parameters through I2C™ Compatible Interface (up to 3.4 Mbps): – Input Current – Fast-Charge/Termination Current – Charge
Voltage (3.5 V to 4.44 V) – Safety Timer with Reset Control – Termination Enable Synchronous Fixed-Frequency PWM Controller Operating at 3 MHz with 0% to 99.5% Duty Cycle Automatic High Impedance Mode for Low Power Consumption Robust Protection – Reverse Leakage Protection Prevents
Battery Drainage – Thermal Regulation and Protection – Input/Output Over
voltage Protection Status Output for Charging and Faults USB Friendly Boot-Up Sequence Automatic Charging Power Up System without Battery 3.5 mm x 3.5 mm 14-Pin QFN Package
APPLICATIONS
Mobile and Smart Phones MP3 Players Handheld Devices
DESCRIPTION
The bq24155 is a compact, ...