Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
bq24157
SLUSB80E – SEPTEMBER 2012...
Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
bq24157
SLUSB80E – SEPTEMBER 2012 – REVISED JANUARY 2018
bq24157 Fully Integrated Switch-Mode Charger With USB Compliance and USB-OTG Support
1 Features
1 Power Up System without Battery Charge Faster than Linear Chargers High-Accuracy
Voltage and Current Regulation
– Input Current Regulation Accuracy: ±5% (100 mA and 500 mA)
– Charge
Voltage Regulation Accuracy: ±0.5% (25°C), ±1% (0°C to 125°C)
– Charge Current Regulation Accuracy: ±5% Input
Voltage Based Dynamic Power
Management (VIN DPM) Bad Adaptor Detection and Rejection Safety Limit Register for Maximum Charge
Voltage and Current Limiting High-Efficiency Mini-USB/AC Battery Charger for
Single-Cell Li-Ion and Li-Polymer Battery Packs 20-V Absolute Maximum Input
Voltage Rating 6.5-V Maximum Operating Input
Voltage Built-In Input Current Sensing and Limiting Integrated Power FETs for Up To 1.55-A Charge
Rate Programmable Charge Parameters through I2C™
Compatible Interface (up to 3.4 Mbps): – Input Current Limit – VIN DPM Threshold – Fast-Charge/Termination Current – Charge Regulation
Voltage (3.5 V to 4.44 V) – Low Charge Current Mode Enable/Disable – Termination Enable/Disable Support up to 1.55A Charge Current using 55 mΩ Sensing Resistor Synchronous Fixed-Frequency PWM Controller Operating at 3 MHz With 0% to 99.5% Duty Cycle Automatic High Impedance Mode for Low Power Consumption Robust Protection – Re...