bq24180
www.ti.com
SLUSA02 A – FEBRUARY 2010 – REVISED FEBRUARY 2010
Fully Integrated Switch-Mode One-Cell Li-Ion Cha...
bq24180
www.ti.com
SLUSA02 A – FEBRUARY 2010 – REVISED FEBRUARY 2010
Fully Integrated Switch-Mode One-Cell Li-Ion Charger with Full USB Compliance and
Accessory Power Connection
Check for Samples: bq24180
FEATURES
1
2 Charge Faster than Linear Chargers From Current Limited Input Sources
High-Accuracy
Voltage and Current Regulation
– Input Current Regulation Accuracy: ±5% (100mA, 500mA)
– Charge
Voltage Regulation Accuracy: ±0.5% (25°C), ±1% (0–125°C)
– Charge Current Regulation Accuracy: ±5%
Accessory Power Output (DCOUT)
Input
Voltage Based Dynamic Power Management
Safety Limit Register for Maximum Charge
Voltage and Current Limiting
High-Efficiency Mini-USB/AC Battery Charger for Single-Cell Li-Ion and Li-Polymer Battery Packs
20-V Absolute Maximum and 16.5V Operation Input
Voltage Rating
Built-in Input Current Sensing and Limiting
Integrated Power FETs for Up to 1.5-A Charge Rate
Programmable Charge Parameters through I2C™ compatible Interface (up to 3.4 Mbps)
Synchronous Fixed-Frequency PWM Controller Operating at 3 MHz With 0% to 99.5% Duty Cycle
Safety Timer and Software Watchdog Reverse Leakage Protection Prevents Battery
Drainage Thermal Regulation and Protection Status Outputs for Charging and Faults 25-Pin WCSP Package
APPLICATIONS
Mobile Phones and Smart Phones Portable Media Players Handheld Devices
DESCRIPTION
The bq24180 is a compact, flexible, high-efficiency, USB-friendly switch-mode charge management device for sin...