DatasheetsPDF.com

BTA208S-600F Datasheet

Part Number BTA208S-600F
Manufacturers NXP
Logo NXP
Description Three quadrant triacs guaranteed commutation
Datasheet BTA208S-600F DatasheetBTA208S-600F Datasheet (PDF)

Philips Semiconductors Objective specification Three quadrant triacs guaranteed commutation GENERAL DESCRIPTION Passivated guaranteed commutation triacs in a plastic envelope suitable for surface mounting, intended for use in motor control circuits or with other highly inductive loads. These devices balance the requirements of commutation performance and gate sensitivity. The "sensitive gate" E series and "logic level" D series are intended for interfacing with low power drivers, including mic.

  BTA208S-600F   BTA208S-600F






Part Number BTA208S-600F
Manufacturers WeEn
Logo WeEn
Description 3Q Hi-Com Triac
Datasheet BTA208S-600F DatasheetBTA208S-600F Datasheet (PDF)

BTA208S-600F 3Q Hi-Com Triac 22 August 2017 Product data sheet 1. General description Planar passivated high commutation three quadrant triac in a SOT428 (DPAK) surface mountable plastic package. This "series F" triac balances the requirements of commutation performance and gate sensitivity and is intended for interfacing with low power drivers and logic ICs including microcontrollers in higher noise environments. 2. Features and benefits • 3Q technology for improved noise immunity • Direct t.

  BTA208S-600F   BTA208S-600F







Three quadrant triacs guaranteed commutation

Philips Semiconductors Objective specification Three quadrant triacs guaranteed commutation GENERAL DESCRIPTION Passivated guaranteed commutation triacs in a plastic envelope suitable for surface mounting, intended for use in motor control circuits or with other highly inductive loads. These devices balance the requirements of commutation performance and gate sensitivity. The "sensitive gate" E series and "logic level" D series are intended for interfacing with low power drivers, including micro controllers. BTA208S series D, E and F QUICK REFERENCE DATA SYMBOL PARAMETER BTA208SBTA208SBTA208SRepetitive peak off-state voltages RMS on-state current Non-repetitive peak on-state current MAX. 600D 600E 600F 600 8 65 MAX. 800E 800F 800 8 65 UNIT VDRM IT(RMS) ITSM V A A PINNING - SOT428 PIN NUMBER 1 2 3 tab Standard S MT1 MT2 gate MT2 PIN CONFIGURATION tab SYMBOL T2 T1 2 1 3 G LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134). SYMBOL VDRM IT(RMS) ITSM PARAMETER Repetitive peak off-state voltages RMS on-state current Non-repetitive peak on-state current full sine wave; Tmb ≤ 102 ˚C full sine wave; Tj = 25 ˚C prior to surge t = 20 ms t = 16.7 ms t = 10 ms ITM = 12 A; IG = 0.2 A; dIG/dt = 0.2 A/µs CONDITIONS MIN. -600 6001 8 MAX. -800 800 UNIT V A I2t dIT/dt IGM VGM PGM PG(AV) Tstg Tj I2t for fusing Repetitive rate of rise of on-state current after triggering Peak gate current Peak gate voltage Peak gate power Average gate power St.


2005-04-17 : 2SK1792    7611    7611D2    74LS192    7425    LA7830    IDT74FCT827B    IDT74FCT827BT    IDT74FCT827C    IDT74FCT827CT   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)