RF AMPLIFIER MODEL TM6345
Available as:
TM6345, 4 Pin TO-8 (T4) TN6345, 4 Pin Surface Mount (SM3) FP6345, 4 Pin Flatpa...
RF AMPLIFIER MODEL TM6345
Available as:
TM6345, 4 Pin TO-8 (T4) TN6345, 4 Pin Surface Mount (SM3) FP6345, 4 Pin Flatpack (FP4) BX6345, Connectorized Housing (H1)
Features ! Low Noise Figure: 2.5 dB Typical ! Output Power: +17 dBm Typical ! Operating Temp. -55 ºC to +85 ºC ! Environmental Screening Available
Specifications
CHARACTERISTIC Frequency
TYPICAL Ta= 25 ºC 10 - 1100 MHz
MIN/MAX Ta = -55 ºC to +85 ºC
10 - 1100 MHz
Gain (dB)
Power @ 1 dB Comp. (dBm)
Reverse Isolation (dB)
12.3 +17 -13.5
10.5 Min. +15.0 Min. -12.0 Max.
VSWR
In
Out
Noise figure (dB)
1.5:1 2.0:1 2.5
2.0:1 Max. 3.0:1 Max. 4.0 Max.
Power
Vdc
+15
+15
m A 45
48 Max.
Note: Care should always be taken to effectively ground the case of each unit.
Typical Intermodulation Performance at 25 ºC
Second Order Harmonic Intercept Point ...... +54 dBm (Typ.) Second Order Two Tone Intercept Point ....... +46 dBm (Typ.) Third Order Two Tone Intercept Point ........... +33 dBm (Typ.)
Maximum Ratings Ambient Operating Temperature ................ -55ºC to +100 ºC Storage Temperature .................................-62ºC to +125 ºC Case Temperature .................................................. +125 ºC DC
Voltage .......................................................... +18 Volts Continuous RF Input Power .................................. +13 dBm Short Term RF Input Power...... 50 Milliwatts (1 Minute Max.) Maximum Peak Power ................... 0.5 Watt (3 µsec Max.)
14 13
12
11 10
Start 10 MHz...