BZW04-28 Datasheet
Part Number |
BZW04-28 |
Manufacturers |
Vishay |
Logo |
|
Description |
Transient Voltage Suppressors |
Datasheet |
BZW04-28 Datasheet (PDF) |
www.vishay.com
BZW04-5V8 thru BZW04-376
Vishay General Semiconductor
TRANSZORB® Transient Voltage Suppressors
DO-41 (DO-204AL)
FEATURES • Glass passivated chip junction • Available in uni-directional and bi-directional • 400 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Solder dip 275 °C max. 10 s, per JESD 22-B106 • AEC-Q101 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
VWM VBR (uni-directional)
VBR (bi-directional) PPPM PD
IFSM (uni-directional only) TJ max. Polarity
5.8 V to 376 V 6.45 V to 462 V 6.45 V to 462 V
400 W 1.5 W 40 A 175 °C Uni-directional, bi-directional
Package
DO-41 (DO-204AL)
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional types, use B suffix (e.g. BZW04P-6V4B). Electrical characteristics apply in both directions.
TYPICAL AP.
Part Number |
BZW04-28 |
Manufacturers |
EIC discrete Semiconductors |
Logo |
|
Description |
TRANSIENT VOLTAGE SUPPRESSOR |
Datasheet |
BZW04-28 Datasheet (PDF) |
BZW04 SERIES
VBR : 6.8 - 440 Volts PPK : 400 Watts
FEATURES :
* 400W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min) * Typical IR less then 1µA above 10V
TRANSIENT VOLTAGE SUPPRESSOR
DO - 41
1.00 (25.4) MIN.
0.107 (2.74) 0.080 (2.03)
0.205 (5.20) 0.160 (4.10)
MECHANICAL DATA
* Case : DO-41 Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, method 208 guaranteed * Polarity : Color band denotes cathode end except Bipolar. * Mounting position : Any * Weight : 0.339 gram
0.034 (0.86) 0.028 (0.71)
1.00 (25.4) MIN.
Dimensions in inches an.
Part Number |
BZW04-28 |
Manufacturers |
Multicomp |
Logo |
|
Description |
Transient Voltage Suppressor Diodes |
Datasheet |
BZW04-28 Datasheet (PDF) |
BZW04 Series
DO-41
Features:
• Plastic package. • Exceeds environmental standards of MIL-STD-19500. • 400W surge capability at 10 x 1000µs waveform, duty
cycle: 0.01%. • Excellent clamping capability. • Low impedancesurge resistance. • Very fast response timeV. • Typical IR less than 1µA above 10V. • High temperature soldering guaranteed: 260°C/10
seconds/0.375 inch (9.5mm) lead length/5lbs. (2.3kg) tension.
Dimensions : Inches (Millimetres)
Mechanical Data
Case : Molded plastic. Lead : Axial leads, solderable per MIL-STD-202, Method 208. Polarity : Color band denotes cathode except bipolar. Weight : 0.34 gram.
Page <1>
14/05/08 V1.1
BZW04 Series
Maximum Ratings and Electrical Characte.
Part Number |
BZW04-28 |
Manufacturers |
Taiwan Semiconductor |
Logo |
|
Description |
Transient Voltage Suppressor |
Datasheet |
BZW04-28 Datasheet (PDF) |
CREAT BY ART
Transient Voltage Suppressor
FEATURES
- Excellent clamping capability - Low impedance surge resistance - 400W surge capability at 10 / 1000 μs waveform - Very fast response time - Typical IR less than 1μA above 10V - Compliant to RoHS Directive 2011/65/EU and
in accordance to WEEE 2002/96/EC
- Halogen-free according to IEC 61249-2-21 definition
BZW04 SERIES
Taiwan Semiconductor
MECHANICAL DATA
Case: DO-204AL (DO-41) Molding compound, UL flammability classification rating 94V-0 Base P/N with suffix "G" on packing code - green compound (halogen-free) Terminal: Matte tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 1A whisker test, Weight: 0.3g (approximately)
DO.
Part Number |
BZW04-28 |
Manufacturers |
General Semiconductor |
Logo |
|
Description |
TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR |
Datasheet |
BZW04-28 Datasheet (PDF) |
BZW04P-5V8 THRU BZW04-376
TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR
Stand-off Voltage - 5.8 to 376 Volts
DO204AL
Peak Pulse Power - 400 Watts
FEATURES
♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Glass passivated chip junction ♦ 400W peak pulse power capability with a 10/1000µs waveform, repetition rate (duty cycle): 0.01% ♦ Excellent clamping capability ♦ Low incremental surge resistance ♦ Fast response time: typically less than 1.0 ps from 0 Volts to V(BR) for unidirectional and 5.0ns for bi-directional types ♦ Typical ID less than 1µA above 10V rating ♦ High temperature soldering guaranteed: 265°C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) t.
Part Number |
BZW04-28 |
Manufacturers |
Diotec Semiconductor |
Logo |
|
Description |
Unidirectional and bidirectional Transient Voltage Suppressor Diodes |
Datasheet |
BZW04-28 Datasheet (PDF) |
BZW 04-5V8 ... BZW 04-376B Unidirectional and bidirectional Transient Voltage Suppressor Diodes Unidirektionale und bidirektionale Spannungs-Begrenzer-Dioden
Peak pulse power dissipation Impuls-Verlustleistung Maximum stand-off voltage Maximale Sperrspannung Plastic case – Kunststoffgehäuse Weight approx. – Gewicht ca. Plastic material has UL classification 94V-0 Gehäusematerial UL94V-0 klassifiziert
Dimensions / Maße in mm
400 W 5.8...376 V DO-15 (DO-204AC) 0.4 g
Standard packaging taped in ammo pack Standard Lieferform gegurtet in Ammo-Pack
see page 16 siehe Seite 16
For bidirectional types (suffix “B”), electrical characteristics apply in both directions. Für bidirektionale Dioden (S.
Transient Voltage Suppressors
www.vishay.com
BZW04-5V8 thru BZW04-376
Vishay General Semiconductor
TRANSZORB® Transient Voltage Suppressors
DO-41 (DO-204AL)
FEATURES • Glass passivated chip junction • Available in uni-directional and bi-directional • 400 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Solder dip 275 °C max. 10 s, per JESD 22-B106 • AEC-Q101 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
VWM VBR (uni-directional)
VBR (bi-directional) PPPM PD
IFSM (uni-directional only) TJ max. Polarity
5.8 V to 376 V 6.45 V to 462 V 6.45 V to 462 V
400 W 1.5 W 40 A 175 °C Uni-directional, bi-directional
Package
DO-41 (DO-204AL)
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional types, use B suffix (e.g. BZW04P-6V4B). Electrical characteristics apply in both directions.
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, and telecommunication.
MECHANICAL DATA
Case: DO-41 (DO-204AL), molded epoxy over passivated chip Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified Terminals: matte tin plated leads, solderabl.
2017-12-22 : RGP15K RGP15MA RGP15JA BZW04-11 BZW04P11 BZW04-10 BZW04P10 BZW04P9V4 BZW04-9V4 BZW04-8V5