WIDE BANDWIDTH AMPLIFIER UNIT
C11184
The output signal from a photomultiplier tube can be directly input to the C11184 ...
WIDE BANDWIDTH AMPLIFIER UNIT
C11184
The output signal from a photomultiplier tube can be directly input to the C11184 and it provides a
voltage output signal with 50 Ω load at a conversion factor of 1.25 mV/µA. It can be used as a wide bandwidth amplifier not only for a photomultiplier tube but also for other detectors, or simply as a wide bandwidth amplifier.
FEATURES
GWide Bandwidth: DC to 300 MHz GCurrent-to-
voltage Conversion Factor: 1.25 mV / µA at 50 Ω load resistance GRise Time: 1.2 ns (Typ.) GNon-inverting Output GCompact . Light Weight GMCX Connector
Accessory (Supplied): MCX-BNC Adapter (2pcs)
SPECIFICATIONS
Description / Value DC to 300 MHz 28 dB ± 2 dB
Voltage Gain A (Approx. 25 times) 2.5 mV/µA Current-to-
voltage Load Resistance: 1 MΩ 1.25 mV/µA Conversion Factor Load Resistance: 50 Ω Typ. Rise Time 1.2 ns Input Polarity Positive / Negative Amplifying Method Non-inverting Output 50 Ω Input Impedance Recommended Load Resistance 50 Ω Maximum Output Load Resistance: 1 MΩ ±2 V Min. Load Resistance: 50 Ω Signal
Voltage ±1 V Min. Typ. Output Noise
Voltage A 1 mV rms Input MCX-R B Output Connector MCX-R B Power DIN (6-pin) Power Supply
Voltage ±5 V Max. Power Supply
Voltage ±6.5 V Max. Power Supply Current ±70 mA Operating Temperature 0 °C to +40 °C Storage Temperature -15 °C to +60 °C Weight Approx. 40 g
NOTE: ALoad Resistance: 50 Ω BMCX-BNC adapter is supplied
Figure 1: Typical Frequency Response
10 5
TACCB0112EA
Parameter Frequency Bandwidth (-3 dB)
at 50 Ω lo...