Analog Peripherals - 10-Bit ADC
• Up to 500 ksps • Built-in analog multiplexer with single-ended and
differential mode
•...
Analog Peripherals - 10-Bit ADC
Up to 500 ksps Built-in analog multiplexer with single-ended and
differential mode
VREF from external pin, internal reference, or VDD Built-in temperature sensor External conversion start input option - Two comparators - Internal
voltage reference - Brown-out detector and POR Circuitry On-Chip Debug - On-chip debug circuitry facilitates full speed, non-intrusive in-system debug (No emulator required)
- Provides breakpoints, single stepping, inspect/modify memory and registers
- Superior performance to emulation systems using ICE-chips, target pods, and sockets
Voltage Supply Input: 2.7 to 5.25 V -
Voltages from 2.7 to 5.25 V supported using On-Chip
Voltage Regulators High Speed 8051 μC Core - Pipelined instruction architecture; executes 70% of
instructions in 1 or 2 system clocks
- Up to 48 MIPS operation
- Expanded interrupt handler
C8051F388/9/A/B
Flash MCU Family
Memory - 4352 or 2304 Bytes RAM - 64 or 32 kB Flash; In-system programmable in 512-byte
sectors Digital Peripherals - 40/25 Port I/O; All 5 V tolerant with high sink current - Hardware enhanced SPI™, two I2C/SMBus™, and two
enhanced UART serial ports - Six general purpose 16-bit counter/timers - 16-bit programmable counter array (PCA) with five cap-
ture/compare modules - External Memory Interface (EMIF) Clock Sources - Internal Oscillator: ±1.5% accuracy. Supports all UART
modes - External Oscillator: Crystal, RC, C, or clock (1 or 2 Pin
modes) - Low Frequency (80 kHz) I...